|
|
Renovation of escalator
Kobzík, Martin ; Šebesta, Luděk (referee) ; Pokorný, Přemysl (advisor)
This master's thesis covers the construction analysis of an escalator by the Otis a.s. company and the conception of its modernization called "In-truss".This type of modernization consists in preserving the supporting construction of the 506-type escalator into which the components of newer 506-NCE series are to be built in. Such operation requires modifying the construction and creating adaptors used to anchor the new components to it. These modifications lead to the stress testing of the construction, that is done by using the finite elements method in NX-Ideas software. The thesis contains the design of selected subsystems of the escalator, the stress testing of the new supporting construction and the creation of volume model in CREO-Parametric application for further use.
|
|
|
Solution of transfer junction on the Konečného square in Brno after putting the line NSRLD into operation
Rosík, Jan ; Veselý, Josef (referee) ; Smělý, Martin (advisor)
My master‘s thesis is concerned with study of location of tram stop, part od North - South Railway Line Diameter, which is supposed to be in underground level below Konečného square, important transfer junction. According to this location find out the best place to situate pedestrian exits and elevators in nearby streets Nerudova, Kotlářská and Veveří. After building up the station, pedestrian transfers will be safer and time to get into the centre of Brno/ job for commuter people will be shortened. This master thesis also deals with enlargement of tram islands, repositioning of trolleybus stop from Kotlářská street, movement of pedestrians in area and optimization of traffic lines.
|
|
|
Centre of Culture Brno
Hanychová, Hana ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Štěpánek, Ladislav (advisor)
Cultural center is situated in a part of Brno Stary Liskovec at Mikulaskovo square. The land is terraced character, it is bordered by buildings of prefabricated houses, at the bottom is hub of public transport. The building is composed of three masses – two cultural halls and in the middle is shopping mall. Shopping mall replicates the terrain slopes, it has three floors where the first and second is partially embedded in the ground. The great hall is located on the second terrace and is connected to 2.NP, a small hall is on the third terrace and is connected to 3.NP. The bearing structure is reinforced concrete frame in the module 5x5m and 5x10m, the frame is lining concrete monolithic perimeter wall in 1.NP, in the others floors with blocks of YTONG. As the roofing is flat roof. Stairs are designed as escalators. Establishment of an object is made of reinforced concrete foundations pass and quiffs.
|
|
| |
|
|
Improving the quality of the escalators/elevators production process
Vejtasová, Vendula ; Rozehnalová, Jana (referee) ; Blecha, Petr (advisor)
The bachelor thesis deals with the process of manufacturing of escalators and moving sidewalks. It focuses on the eligibility of the process, its evaluation and application of selected statistical tools in the form of capability indexes, control charts and PPM. Theoretical knowledges are applied to a specific technological process and its critical characteristic. The result of the work is an evaluation of the proper application of statistical methods and proposals on how to improve them.
|
|
|
Improving the quality of the escalators/elevators production process
Vejtasová, Vendula ; Rozehnalová, Jana (referee) ; Blecha, Petr (advisor)
The bachelor thesis deals with the process of manufacturing of escalators and moving sidewalks. It focuses on the eligibility of the process, its evaluation and application of selected statistical tools in the form of capability indexes, control charts and PPM. Theoretical knowledges are applied to a specific technological process and its critical characteristic. The result of the work is an evaluation of the proper application of statistical methods and proposals on how to improve them.
|
|
|
Renovation of escalator
Kobzík, Martin ; Šebesta, Luděk (referee) ; Pokorný, Přemysl (advisor)
This master's thesis covers the construction analysis of an escalator by the Otis a.s. company and the conception of its modernization called "In-truss".This type of modernization consists in preserving the supporting construction of the 506-type escalator into which the components of newer 506-NCE series are to be built in. Such operation requires modifying the construction and creating adaptors used to anchor the new components to it. These modifications lead to the stress testing of the construction, that is done by using the finite elements method in NX-Ideas software. The thesis contains the design of selected subsystems of the escalator, the stress testing of the new supporting construction and the creation of volume model in CREO-Parametric application for further use.
|
|
| |
|
|
Solution of transfer junction on the Konečného square in Brno after putting the line NSRLD into operation
Rosík, Jan ; Veselý, Josef (referee) ; Smělý, Martin (advisor)
My master‘s thesis is concerned with study of location of tram stop, part od North - South Railway Line Diameter, which is supposed to be in underground level below Konečného square, important transfer junction. According to this location find out the best place to situate pedestrian exits and elevators in nearby streets Nerudova, Kotlářská and Veveří. After building up the station, pedestrian transfers will be safer and time to get into the centre of Brno/ job for commuter people will be shortened. This master thesis also deals with enlargement of tram islands, repositioning of trolleybus stop from Kotlářská street, movement of pedestrians in area and optimization of traffic lines.
|
|
|
Centre of Culture Brno
Hanychová, Hana ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Štěpánek, Ladislav (advisor)
Cultural center is situated in a part of Brno Stary Liskovec at Mikulaskovo square. The land is terraced character, it is bordered by buildings of prefabricated houses, at the bottom is hub of public transport. The building is composed of three masses – two cultural halls and in the middle is shopping mall. Shopping mall replicates the terrain slopes, it has three floors where the first and second is partially embedded in the ground. The great hall is located on the second terrace and is connected to 2.NP, a small hall is on the third terrace and is connected to 3.NP. The bearing structure is reinforced concrete frame in the module 5x5m and 5x10m, the frame is lining concrete monolithic perimeter wall in 1.NP, in the others floors with blocks of YTONG. As the roofing is flat roof. Stairs are designed as escalators. Establishment of an object is made of reinforced concrete foundations pass and quiffs.
|
guest ::
